| PRODUCT NAME | PRODUCT CODE | PRODUCT DESCRIPTION | USAGE AREAS | DENSITY gr/ml | VOLUME % |
| SYNTHETIC TOP COAT PAINT | GEOSENT 2000 | It is an alkyd based, air drying, semi-gloss topcoat paint. | It is used in steel constructions, agricultural machinery, wrought irons, etc. | 1.17±0,1 | 52±5 |
| LUXURY SYNTHETIC TOP COAT PAINT | GEOSENT 3000 | It is an alkyd based, air drying, glossy topcoat paint. | It can be used on all kinds of steel parts, used in indoor and outdoor environments, steel constructions, agricultural tools, transformer industry, special tanks and tubes. | 1.15±0,1 | 58±5 |
| HEAT RESISTANT SYNTHETIC TOP COAT PAINT | GEOSENT 3310 | It is an alkyd based, air drying, fast drying, one component, glossy, top coat paint. Exposed to atmospheric conditions; It is designed to be used in structures where brightness, heat resistance and low flame spread are required. | It is used on wooden and concrete surfaces, steel constructions, machinery and equipment, and fire extinguisher pipes. Good adhesion, ease of application, and perfect covering are typical features. It is used for protective purposes and its physical, chemical and heat resistance is very good. | 1,25±0,1 | 55±5 |
| RAPID TOP COAT PAINT | GEOTOP 3201 | Rapid alkyd based, one component, air drying, fast drying topcoat. It has a semi-matt-glossy surface. It is produced in all desired RAL colors. | It is used in industrial facilities, steel construction manufacturing, machinery manufacturing, trailer manufacturing and agricultural machinery industry. | 1.35±0,1 | 52±5 |
| RAPID TOP COAT PAINT | GEOTOP 3500 | Rapid alkyd based, one component, air drying, fast drying topcoat. It has a shiny surface. It is produced in all desired RAL colors. | It is used in industrial facilities, steel construction manufacturing, machinery manufacturing, trailer manufacturing and agricultural machinery industry. | 1.20±3 | 55±5 |
| EPOXY TOP COAT PAINT | GEOCOAT 3703 | It is a semi-gloss topcoat paint with two components, solvent epoxy resin. Its physical and chemical resistance is excellent. It is resistant to acids, salt water, alkaline environments, oils, etc. chemical abrasion. | It is used in marine structures, heavy industry facilities, steel construction structures, machinery industry, waste water treatment plants, petrochemical plants. It is a multi-purpose topcoat paint. | 1.40±0,1 | 60±5 |
| EPOXY BARRIER TOP COAT PAINT | GEOCOAT 3710 | It is a two-component, low VOC, high volumetric, intermediate / topcoat paint that can be applied as an epoxy-based barrier that provides good protection in the long term. When immersed in water after application, it continues to cure and resists corrosion. | It can be used in corrosive environments with high humidity, humid surfaces and low temperatures, including cellulose and paper plants, chemical plants, steel and concrete pile pipes under scaffolding, sluices. | 1.55±3 | 85±5 |
| SOLVENT FREE POLYURETHANE PAINT | EKOPİPE 800 | It is a two-component, solvent-free, polyurethane based coating paint. It gives very good chemical resistance, water resistance and excellent mechanical strength. It has very good adhesion strength. | It is specially designed for drinking water pipes and tanks. It can be used for cooling water pipelines of power stations, sewage pipelines and steel structures of petrochemical plants, etc.It can be used in places where fast curing is desired. | 1,25±0,1 | ~100 |
| SOLVENT FREE PAINT | EKOPIPE 900 | It is a two-component, solvent-free, epoxy based, hygienic paint. Its suitability for drinking waterhas been tested by WRc-NSF according to BS 6920 and approved by WRAS. It also meets AWWA C210 standards. It does not contain benzyl alcohol. Its surface is bright and smooth. | As it can be cured in high humidity environments and low temperatures, it can be used in outdoor environments open to atmospheric conditions. Due to its drinking water certificate, it is the approved paint of drinking water pipelines and drinking water tanks. | 1.28±0,1 | ~100 |
| SOLVENT FREE PHENOLIC EPOXY PAINT | GEOCOAT 3500 | It is a two-component, epoxy based (phenolic), high solids primer with excellent adhesion strength, intermediate coat, and topcoat. It can be applied thickly in one coat. It is high – build and contains zinc phosphate as an anticorrosive pigment. It can be cured down to -5 ºC. It is resistant up to 200ºC. | It is used in fuel tanks, damp surfaces, petrochemical plants. It is very resistant to atmospheric conditions, chemicals, water and solvents. It has excellent adhesion, mechanical resistance, resistance to water, chemicals and solvents. It can cure at low temperatures. The maximum temperature exposure time is a maximum of 1 hour. | 1.35±0,1 | ~100 |
| SOLVENT BASED PHENOLIC EPOXY COAT | GEOCOAT 3550 | It is a phenolic epoxy based, two component top coat paint that can be applied as a thick coat. It has excellent adherence, mechanical resistance, resistance to chemical and crude oil. It can cure at low temperatures. It is resistant up to 200ºC. It does not contain benzyl alcohol and nonyl phenol. | It can be used in pipelines that require excellent chemical resistance against salt and fresh water, petroleum products, crude oil, alkalis and weak acids, drinking water tanks, interior surfaces of petroleum and petroleum products storage tanks, petrochemical plants. | 1.30±0,1 | ~100 |
| SOLVENT FREE COAL-TAR EPOXY PAINT | EKOTAR 3900 | It is a two-component, solvent-free, tar-containing epoxy paint. It is 98% solid. The chemically tar molecule tips meet the AWWA C210 standard capabilities as they can be fully sealed with epoxy molecule tips. It is very resistant to chemicals, alkalis and corrosive acidic substances. It has high corrosion and mechanical resistance. | It is used as an internal and external surface coating paint on underground and above-ground surfaces, metal surfaces exposed to excessive wear, above-ground structures, and in atmospheric conditions with high humidity and chemical wear. It is used in fuel tanks, water tanks, steel and concrete pipelines. | 1.65±0,1 | 95±5 |
| COAL-TAR EPOXY PAINT | EKOTAR 902 | It is a two-component, tar-containing epoxy paint. It is very resistant to chemicals, alkalis and corrosive acidic substances. It has high corrosion and mechanical resistance. It shows excellent adhesion performance. | It is used in fuel tanks, water tanks, steel and concrete pipelines. It is used as an internal and external surface coating paint on underground and above-ground surfaces, metal surfaces exposed to excessive wear. | 1.50±0,1 | 65±5 |
| COAL-TAR TEPOXY PAIN | EKOTAR 905 | It is a two-component, tar-containing epoxy paint. It is high solids and thixotropic. It is very resistant to chemicals, alkalis and corrosive acidic substances. It has high corrosion and mechanical resistance. It shows excellent adhesion performance. | It is preferred when high film thickness (650-700 micron wet film thickness) is desired in a single layer. It is used in fuel tanks, water tanks, steel and concrete pipelines. It is used as an internal and external surface coating paint on underground and above-ground surfaces, metal surfaces exposed to excessive wear. | 1.60±0,1 | 75±5 |
| GLASS FLAKE EPOXY PAINT | GOECOAT 3803 | It is a two component, glass flake reinforced, high solids epoxy mastic paint. It has high chemical resistance and cathodic decomposition resistance. It has properties such as excellent adhesion, hardness and wear resistance. It has very successful chemical resistance against salt water, fresh water, crude oil, alkalis and weak acids. The progression of rust occurs in a much longer term than normal filled paints. | It is used in scaffolding pile pipes, underwater and surface structures, water tanks, petrochemical plants, fuel tanks. It shows excellent performance on all kinds of metal outer surfaces where corrosion is very high. With the airless spray method, more than 500 micron dry film thickness can be obtained in one layer. | 1.30±0,1 | 82±5 |
| SOLVENT FREE GLASS FLAKE EPOXY PAINT | GOECOAT 3804 | It is a two component, solvent free, epoxy based, high solids and corrosion resistant, high performance paint that provides excellent physical, chemical and abrasion resistance due to the glass flakes it contains. | It is used as an intermediate and top floor in steel piles, scaffolding, port and bridge steel piles, steel constructions, machines and especially in places with dense industrial atmosphere. It provides resistance to sea water, mineral oil and oil splashes, abrasion and impacts on concrete-metal surfaces where it is used. It can continue curing under water. | 1,25±0,1 | 95±5 |
| NOVALAC EPOXY | GEOCOAT NOVA 7500 | It is a two-component, high volumetric, solvent-free, novalac epoxy paint. It is resistant to all types of fuel. Its chemical resistance is excellent. It is resistant to crude oil up to 90 ° C and hot water up to 95C. Meets MIL PRF 4556F standard criteria. It has a smooth and shiny surface. | It is applied in petrochemical plants, solvent tanks, hot water lines and humid environments. It can be applied in low temperature atmospheric conditions (-10). | 1.40±0,1 | 75±5 |
| NOVALAC EPOXY | GEOCOAT NOVA 7600 | It is a two-component, solvent epoxy paint. It has high volumetric solids. Its chemical resistance is excellent. It is resistant to crude oil up to 90 ° C and hot water up to 95 ° C. It has a smooth and shiny surface. | It is applied in petrochemical plants, solvent tanks, hot water lines and humid environments. It can be applied under low temperature atmospheric conditions (-10 ° C). It shows high performance up to 250°C dry temperature. | 1.35±0,1 | 85±5 |
| ACRYLIC POLYURETHANE TOP COAT | GEOCRYL 3500 | It is an acrylic-based topcoat paint that is resistant to outdoor conditions. It is used in steel constructions,metal surfaces, machines and some plastic, stone and concrete surfaces in order to give an aesthetic appearance. It provides good strength in places subject to atmospheric corrosion. | Foil paints, gilded paints and aluminum pigmented paints are used for decorative purposes, interior and exterior metal, aluminum and galvanized surfaces as top coat after primer. | 1.35±0,1 | 85±5 |
| ACRYLIC TOP COAT | GEOCRYL 3600 | It is a thermoplastic acrylic resin, air curing, one component acrylic topcoat. It has a high degree of UV resistance. Adhesion performance on metal surfaces is high. | It is used in external atmospheric conditions, machinery, commercial vehicles and agricultural vehicles. It can be used for on any metal surface. | 1.20±0,1 | 45±5 |
| ACRYLIC TOP COAT | GEOCRYL 3660 | It is a thermoplastic acrylic copolymer resin structure, one component, air cured topcoat paint. It shows very good adhesion performance on difficult surfaces such as aluminum and galvanize. UV resistance is very good. It has high physical and chemical resistance. Due to its acrylic structure, it forms a glossy, hard and non-yellowing film layer. | It is used in metal coatings, galvanized sheet metal, stainless steel, aluminum profiles, machines and especially in places with dense industrial atmosphere. | 1.20±0,1 | 45±5 |
| POLYURETHANE TOP COAT | GEOPUR 3500 | It is a polyurethane alkyd based, isocyanate modified, two component glossy topcoat paint, has high surface coverage, adhesion performance and elasticity. It dries fast. | It is used as a topcoat paint on outdoor steel surfaces, machines, tanks, commercial vehicles. | 1.30±0,1 | 50±5 |
| ACRYLIC POLYURETHANE TOP COAT | GEOPUR 3700 | It is a polyurethane acrylic isocyanate based, two-component, glossy, topcoat paint with aliphatic structure. It has a high degree of UV resistance. It has low VOC value and high elasticity. It is resistant to physical and chemical wear. | It is used as a topcoat paint on outdoor steel surfaces, machines, tanks and commercial vehicles, where long lasting permanent color and brightness is required. | 1.20±3 | 55±5 |
| ACRYLIC POLYURETHANE TOP COAT | GEOPUR 3800 HS | It is a polyurethane resin based, double component, high solids, cured with aliphatic isocyanate, yellowing resistant, high-gloss acrylic, topcoat enamel paint with high adhesion and high mechanical strength. | It is used in steel constructions, machines and especially in places with dense industrial atmosphere. It is used as the topcoat acrylic paint of paint systems that are used in places subject to atmospheric corrosion. It is recommended for ships to be used on board, decks, living quarters and superstructures. | 1,45±0,1 | 70±5 |
| FLOWCOAT EPOXY | GEOFLOW 2505 | It is a solid epoxy coating paint with two components, epoxy based, anticorrosive zinc phosphate pigment, high volumetric solid material, developed for the inner surfaces of natural gas pipes, and designed to decrease the “drag resistance” by smoothing the inner surface of the pipe. It is designed in accordance with the American Petroleum Institute RP 5L2 standard. | API RP 5L2 meets the standard criteria. It is used in natural gas pipes. Since a smooth pipe inner surface is provided, the gases that will pass through the pipe are passed without losing performance. In this way, pipeline owners are provided with a cost advantage. | 1.30±0,1 | 82±5 |
| EPOXY MASTIC PAINT | GEOMASTIC 2605 | It is a two-component, high volumetric, mastic epoxy paint containing anticorrosive zinc phosphate pigment. It can be used simultaneously as primer, intermediate coat and topcoat. It saves time and product. Its chemical and physical resistance is excellent. It shows superior performance especially in humid environments. | It is used as exterior surface coating in heavy industry facilities, underwater and surface structures, rural areas with high humidity and underground tanks and pipes, concrete surfaces. It is used as a primer / topcoat alone in short and medium term projects. | 1,45±0,1 | 65±5 |
| EPOXY MASTIC PAINT | GEOMASTIC 2608 | It is a two-component, epoxy based, mastic paint containing zinc phosphate. Since zinc phosphate ratio is high, it is anti-corrosive. It shows good protection feature in harsh weather conditions. It has high physical and chemical resistance. | Steel pipes and constructions, machine parts, oil refineries, chemical tanks, waste water facilities, concrete surfaces are the main areas of use. | 1.50±0,1 | 85±5 |
| EPOXY MASTIC PAINT | GEOMASTIC 2610 | It is a modified epoxy resin based, two component, mastic paint containing zinc phosphate pigment.Its chemical resistance and mechanical strength are very high. It is resistant to high temperature steam temperature. It has very good adhesion strength even on damp surfaces. | Used on metal and concrete surfaces, machine parts, power plant chimneys, petrochemical plants, water tanks. | 1.55±0,1 | 90±5 |
| STEEL SURFACE WATER BASED TOP COAT | GEOCOAT 3900 | It is a water based acrylic resin, one component, air drying, hygienic metal topcoat paint. It has high impact and chemical resistance. Despite being water-based, a glossy and smooth surface is obtained. Odorless. It is a new generation topcoat paint. | It is a hygienic topcoat paint used in industrial facilities, indoor and outdoor steel surfaces, food production facilities. It is odorless and not harmful to health. It can be used on all metal surfaces with high scratch resistance. | 1.25±0,1 | 35±5 |
| STEEL PIPE VARNISH | GEOLAC 4151 | It is a synthetic alkyd based, one component, air drying, modified synthetic varnish. Corrosion resistance it is quite high. It shows very good adhesion on the surfaces it is used. | It is used on bare metal surfaces, steel pipes and constructions. | 0.95±0,03 | 35±5 |
| STEEL PIPE VARNISH | GEOLAC 4160 | It is a cellulosic-alkyd based, one component, high corrosion resistance, modified synthetic varnish. It is a waterproofing and protective product for surfaces like concrete, wood etc. It is transparent or can be produced in color if desired. | It is applied to bare metal surfaces to prevent corrosion. It shows very good adhesion on steel pipe, steel structure and similar surfaces and acts as a part of it. In particular, it does not damage the paint on the applied surface. | 0,90±0,05 | 35±5 |
| OVEN DRYING VARNISH | GEOLAC 4170 | It is an acrylic modified polyester and melamine resin based, oven drying glossy varnish. It is a varnish with excellent spreading, gloss, appearance, physical and chemical resistance and high external strength properties. | It is applied in the automotive sector where very high gloss is required or directly on metal surfaces for insulation purposes or on top coat systems. | 0,95±0,05 | 50±5 |
| UNDERWATER EPOXY LAMINATION GROUT | GEOFILLER 1071 | It is a two-component, epoxy based, thixotropic repair and adhesive mortar system. It can be applied in wet and dry environments, on submerged surfaces. It adheres perfectly without being affected by moisture on steel, concrete and wooden surfaces. | It is used for strengthening bridges, buildings, industrial and similar concrete and steel structures, and repair and bonding of polymer fiber systems. It maintains its mechanical properties at low and high temperatures. It is also used as filling, repair and adhesive mortar (A + B + C) | 1,10±0,03 | 95±5 |
| UNDERWATER EPOXY REPAIR AND COATING PUTTY |
GEOFILLER UW 1453 | It is a two component, high solids, thixotropic epoxy paste. It can be applied in wet and dry environments. It shows excellent adhesion performance without being affected by the moisture that can be found on steel surface, concrete and wooden surfaces. In addition to its resistance against abrasion and impacts on concrete, metal and wooden surfaces, it is a unique product for underwater and surface repairs. It is resistant to shock impacts and corrosion occurring on the surface that may be caused by the chemical structure of the concrete due to its structure. It prevents the separation of cathodic bonds from external factors. | It hardens and can be applied under water and it strongly adheres to the surface it is applied to. It can be used as a protective coating on concrete, wood, steel and metal surfaces above and below the water, as well as in restoration and anticorrosive surfaces by coating the surfaces in fresh and salt water. In addition, it shows superior performance on the underwater surfaces. It is used for repairing against corrosion in wastewater plants, scaffolding pile pipes, petrochemical plants, steel and concrete feet of bridges and viaducts, water tanks, and underwater and surface steel and concrete piles of ports. | 1,40±0,1 | ~100 |
| UNDERWATER EPOXY FILLING AND REPAIR GROUT | GEOFILLER UW 6200 | It is an epoxy based filler grout of GEO-ARMOR jacketing system. It has 3 components. Thanks to its flowing feature, it can be easily pumped and injected into the pile jacket. | It provides protection of steel, wood and concrete piles under water and above water against corrosion for many years. | 2,25±0,1 | ~100 |
| UNDERWATER EPOXY REPAIR AND COATING PAINT | GEOFILLER UW 6500 | It is a two component, high solids, thixotropic epoxy repair and coating paint. The material that can be applied in wet and dry environments shows excellent adhesion performance without being affected by the moisture that can be found on metal, concrete and wooden surfaces. It is resistant to shock impacts and corrosion occurring on the surface that may be caused by the chemical structure of concrete. It prevents the separation of cathodic bonds from external factors. | It is specially formulated for underwater applications and wet surfaces, and is used on all kinds of concrete and steel surfaces that remain under water and wave fluttering areas such as bridges, pier feet, docks, pipelines, oil platforms, pontoons, sea vehicles, treatmentand swimming pools. It can be used as a protective coating for concrete, wood, steel and metal surfaces above and below water, as well as for restoration and anticorrosive surfaces. | 2,25±0,1 | ~100 |
| WATER BASED FIRE RETARDANT PAINT | GEOCOAT 9900 | It is an acrylic-based, matt-looking, one-component, fire-retardant, water-based paint.It has been developed to protect buildings from fire for up to 120 minutes and expands to provide fire insulation. It reacts chemically with the flame, which reaches the surface in the event of a fire, and prevents the temperature on the surface from rising to critical degrees. It has high breathing ability. | It is suitable for use in all places where fireproofing is required, concrete, plaster, plasterboard, interior walls and ceilings on interior walls. It can also be used in wooden, prefabricated and structural steel elements. It can also be applied to the edges of curtain wall sheets, wall joints and movable joint parts. | 1,30±0,1 | 60±5 |
| SOLVENT BASED FIRE RETARDANT PAINT | GEOCOAT 9901 | It is a one-component, solvent-based acrylic resin based fire retardant paint for indoor and outdoor surfaces. It is resistant to high temperature. It provides a thermal insulation by swelling with a little temperature. Once dry, its film is non-toxic. | In case of a fire on the applied surface, it reduces the degree of spread of the flame. It prolongs the normal time by isolating the surface against temperature, resulting in ignition, melting or weakening of the structure. It is in matt color and is produced in all pastel colors. | 1,30±0,1 | 68±5 |